BMR Suspension

Fits 2015-2023 S550 Mustangs;Fits 2024-Current S650 Mustangs;Constructed from 1.25-inch x 0.65-inch chromoly tubing;Includes Grade 8 hardware;Bolts to front of K-member;Utilizes factory mounting points for easy installation;Minimizes K-member flex;Improves handling and steering stability;Greatly improves front end rigidity for hardcore performance;Available in red or black hammertone...

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions...

Lockout your rear IRS subframe on your S550 and S650 Mustang with an IRS Subframe Support Brace System from BMR Suspension! The subframe of your Mustang can deflect under hard acceleration, causing slower and inconsistent launches. BMRs IRS Subframe Support Brace System (CB762) improves...

There is nothing like the aggressive look of a car with the right stance! BMR Suspension believes the right springs go beyond looks?your 2015-2023 S550 Mustang and 2024 S650 Mustang needs to perform, too! BMR springs are manufactured from chrome silicon high-tensile spring wire,...

Fits 2015-2023 S550 Mustangs;Fits 2024-Current S650 Mustangs;Manufactured from 0.125-inch and 0.1975-inch steel;Manufactured from 1.25-inch, 0.120-inch wall DOM tubing;Laser-cut, CNC-formed plate steel brackets;Heavy-duty Teflon-lined rod ends;Includes Grade 8 hardware;Strengthens the rear shock mounting locations;Dramatically increases chassis stiffness and improves handling;Improves the rigidity of the rear...

Fits 2015-2023 S550 Mustangs;Fits 2024-Current S650 Mustangs;Manufactured from 0.125-inch and 0.1975-inch steel;Manufactured from 1.25-inch, 0.120-inch wall DOM tubing;Laser-cut, CNC-formed plate steel brackets;Heavy-duty Teflon-lined rod ends;Includes Grade 8 hardware;Strengthens the rear shock mounting locations;Dramatically increases chassis stiffness and improves handling;Improves the rigidity of the rear...

Add rigidity to the subframe of your S550 and S650 Mustang with a Rear Cradle Bushing Kit from BMR Suspension! Under hard launches, the subframe of your Mustang can shift, resulting in slower launches and wheel hop. BMRs Rear Cradle Centering Sleeves (SCB766) reinforce...

Fits 2015-2023 S550 Mustangs;Fits 2024-Current S650 Mustangs;Manufactured from CNC laser-cut steel plate;Includes spacers for larger 16mm coil over strut shafts;Replaces the factory upper strut mounts;100% bolt-on design;Adds caster and camber adjustability;Allows for correction of alignment issues on lowered Mustangs;Provides a total camber range of...

Fits 2015-2023 S550 Mustangs;Fits 2024-Current S650 Mustangs;Manufactured from CNC laser-cut steel plate;Includes spacers for larger 16mm coil over strut shafts;Replaces the factory upper strut mounts;100% bolt-on design;Adds caster and camber adjustability;Allows for correction of alignment issues on lowered Mustangs;Provides a total camber range of...

Add strong lift points and extra rigidity to your S650 Mustang with bolt-on Chassis Jacking Rails from BMR Suspension! Jacking your Mustang on its pinch welds can easily damage the pinch welds and floor pans, eventually causing panel misalignment. BMRs Low Profile Chassis Jacking...

Lockout your rear IRS subframe on your S550 and S650 Mustang with an IRS Subframe Support Brace System from BMR Suspension! The subframe of your Mustang can deflect under hard acceleration, causing slower and inconsistent launches. BMRs IRS Subframe Support Brace System (CB762) improves...

Launching harder, reducing wheel hop, and adding cornering consistency to your 2020-2022 S550 GT500 Mustang and 2024 Performance pack and Dark horse Mustang is easy with billet aluminum vertical links from BMR Suspension. Stock stamped steel vertical links with soft rubber bushings deflect under...

Fits 2020-2022 S550 GT500 Mustangs and 2024 Performance pack and Dark horse Mustangs;CNC-machined 6061-T6 billet aluminum;CNC-machined Delrin bushings;Spherical Bearings;All 304 stainless steel rod end spacers;Eliminates vertical link flex;Eliminates bushing deflection;Eliminates wheel alignment changes due to vertical link flex;Designed for street performance, drag race, and...

Launching harder, reducing wheel hop, and adding cornering consistency to your 2020-2022 S550 GT500 Mustang and 2024 Performance pack and Dark horse Mustang is easy with billet aluminum vertical links from BMR Suspension. Stock stamped steel vertical links with soft rubber bushings deflect under...

Launching harder, reducing wheel hop, and adding cornering consistency to your 2020-2022 S550 GT500 Mustangs and 2024 Performance pack and Dark horse Mustangs is easy with a Delrin bushing kit for your factory vertical links from BMR Suspension. Stock soft rubber bushings deflect under...

Reduce weight and improve performance in your 2015-2023 S550 Mustang with a Rear Bumper Support from BMR Suspension. Factory supports are manufactured from stamped steel and are unnecessarily heavy. Fabricated from light weight, 1 -inch Chromoly steel tubing and 3/16-inch laser cut plates, our...

Reduce weight and improve performance in your 2015-2023 S550 Mustang with a Rear Bumper Support from BMR Suspension. Factory supports are manufactured from stamped steel and are unnecessarily heavy. Fabricated from light weight, 1 -inch Chromoly steel tubing and 3/16-inch laser cut plates, our...

Fits all S550 Mustangs;Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;63%-208% increase is sway bar rate over stock sway bar;Cold formed to better resist torsional fatigue;Manufactured from 25mm heavy-duty bar stock for increased strength;Three-way adjustable for street and track use...

BMR Suspension's SB043 front and rear sway bar kit was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty 35mm (front) and 25mm (rear)DOM steel tubing, the SB043 is cold formed to better resist...

BMR Suspension's SB043 front and rear sway bar kit was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty 35mm (front) and 25mm (rear)DOM steel tubing, the SB043 is cold formed to better resist...