Fore Innovations

Side 1: AN-10 Male (7/8"-14 threads) Side 2: EFI 1/2" Female Black anodized aluminum, dual Viton o-rings, steel snap ring TYPICAL USES OE feed line on Hellcat LX / LC (near fuel tank) OE feed line on Hellcat LX / LC (fuel rails) *there...

Side 1: AN-8 Male (3/4"-16 threads) Side 2: EFI 1/2" Female Black anodized aluminum, dual Viton o-rings, steel snap ring TYPICAL USES OE feed line on Hellcat LX / LC (near fuel tank) OE feed line on Hellcat LX / LC (fuel rails) *there...

Side 1: AN-8 Male (3/4"-16 threads) Side 2: EFI 1/2" Male Black anodized aluminum TYPICAL USES OE feed line on Hellcat LX / LC (near fuel tank) OE feed line on Hellcat LX / LC (fuel rails) *there may be other uses than what...

Fuel Rails NOT INCLUDEDCrossover and OE line adapter kit includes: Does not come preassembled Fittings to interface to incoming OE feed line without binding Odorless hose assemblies using low-permeable FlexLP fuel line New rail fuel pressure sensor installed in lossless -8 feed line in...

Cap for EFI 1/2" (this is a female cap, so it will plug a EFI 1/2" male) Black anodized aluminum, dual Viton o-rings, steel snap ring TYPICAL USES OE feed outlet on Hellcat LX / LC (at passenger side of fuel tank) *there may...

Fifteen foot long extension pigtail for relocating the fuel pressure sensor on the following applications: Hellcat Demon Trackhawk Camaro, 5th and 6th generation CTS, 2nd and 3rd generation ATS Corvette, 6th generation ZR1, 7th generation Proper termination is required on the opposite end. Fuel...

The finest fuel rails ever produced for the Hemi engine. We start with a SOLID BLOCK of aircraft grade 6061 aluminum and fully machine every feature to perfection on our five axis CNC. Our rails incorporate machined-in mounting tabs completely eliminate tab failure common...

Fore Innovations billet fuel rails for the Hellcat and Demon Hemi. Machined from a solid block of 6061 aluminum. Integrated mounting tabs eliminate rail tab flex under the highest intake and fuel pressures. Does not come assembled Use with OE length injectors and/or Injector...

Install AN-8 Male adapter on EFI quick disconnect end of OE Hellcat fuel pressure sensor Reuse OE sensor in larger -8 fuel lines Black anodized aluminum See this video on how to remove sensor from OE rail assembly without scarring barb. See this video on how to install...

Install AN-8 Male adapter on barb of OE Hellcat fuel pressure sensor Reuse OE sensor in larger -8 fuel lines Black anodized aluminum bodies, brass retention nut, stainless lockring, Viton o-rings See this video on how to remove sensor from OE rail assembly without scarring barb.See this...

Use to plug quick disconnect EFI end of Hellcat OE fuel pressure sensor Solid EFI 3/8" male plug Black anodized aluminum See this video on how to remove sensor from OE rail assembly without scarring barb. See this video on how to install fitting on barb.TYPICAL USES Plug...

New AC Delco sensor with universal 1/8 NPT adapter Replaces restrictive OE sensor Plugs directly into OE harness Black anodized aluminum adapter with Viton o-ring included TYPICAL USES After fuel filter in Hellcat LX/LC After fuel filter in C7 Corvette After fuel filter in...

Fuel Rails NOT INCLUDEDCrossover and OE line adapter kit includes: Does not come preassembled Fittings to interface to incoming OE feed line without binding Odorless hose assemblies using low-permeable FlexLP fuel line New rail fuel pressure sensor installed in lossless -8 feed line in...

Lowers fuel rail ~14mm for clearance under plenum and throttle body Includes four anodized rail standoffs and new stainless screws Rails sold before July 2019 may need minor clearance work around injector boss Requires short 34mm injectors Only required for Kenne Bell Mammoth, NOT...

Lowers fuel rail ~14mm for clearance under Whipple throttle body Includes four anodized rail standoffs and new stainless screws Rails sold before July 2019 may need minor clearance work around injector boss Requires short 34mm injectors Works only with Whipple supercharger for Hellcat. Only...

For 2015+ Hellcat or Demon (not SRT / RT variants)Use in conjunction with a complete return style fuel system for 1000+ rwhp with dual fuel pumps (recommended to run one pump full time, then activate secondary pump under load). Retains OE fuel level sender, EVAP...

For 2015+ Hellcat (not Demon or SRT / RT variants) Drop in pump assembly for Hellcat Charger and Challenger Use with OE fuel feed outlet, or with upgraded feed line directly off pump module No control support (modulation or regulation): see our complete Hellcat fuel...

TEMPORARY PRODUCT CONFIGURATIONFor 2015+ Hellcat (not Demon, or SRT / RT variants) Drop in pump assembly for Hellcat Charger and Challenger Use with OE fuel feed line (returnless) or upgraded fuel lines (return) No control support (modulation or regulation): see our complete Hellcat fuel systems...

For 2015+ Hellcat or Demon (not SRT / RT variants)Use in conjunction with a complete return style fuel system for 1200+ rwhp with triple fuel pumps (recommended to run one pump full time, then activate secondary pumps under load). Retains OE fuel level sender, EVAP...

Hardware pack includes: 4X 1.5X6 Viton O-Ring1X 2X11 Viton O-Ring1X 2X26 Viton O-Ring1X 908 Viton O-Ring4X M5X20 SHCS Bolts2X M5X100 SHCS Bolts Also included: o-ring for feed and return. Choose the correct replacement Viton o-ring set:Type A - Use with GSS342, F90000262, F10000302 fuel pumpType B -...