aFe
-
Vendor:aFe
aFe Atlas Exhaust 5in DPF-Back Al Steel 2016 Nissan Titan XD V8-5.0L Black Tip
The new ATLAS exhaust was engineered to perform in the most extreme environments. Constructed from mandrel bent aluminized steel tubing for increased exhaust velocity, these systems are designed to maximize horsepower and torque gains, while lowering EGTs. The 2-piece tailpipe and bayonet style hangers...- $568.00
- $568.00
- Unit price
- per
-
Vendor:aFe
aFe Atlas Exhaust 5in DPF-Back Al Steel 2016 Nissan Titan XD V8-5.0L Polished Tip
The new ATLAS exhaust was engineered to perform in the most extreme environments. Constructed from mandrel bent aluminized steel tubing for increased exhaust velocity, these systems are designed to maximize horsepower and torque gains, while lowering EGTs. The 2-piece tailpipe and bayonet style hangers...- $420.00
- $420.00
- Unit price
- per
-
Vendor:aFe
aFe Atlas Exhaust 5in DPF-Back Exhaust Aluminized Steel 2016 Nissan Titan XD V8-5.0L w/ Polished Tip
The new ATLAS exhaust was engineered to perform in the most extreme environments. Constructed from mandrel bent aluminized steel tubing for increased exhaust velocity, these systems are designed to maximize horsepower and torque gains, while lowering EGTs. The 2-piece tailpipe and bayonet style hangers...- $533.00
- $533.00
- Unit price
- per
-
Vendor:aFe
aFe Black Series Carbon Fiber CAIS w/PDS Filter 11-19 Dodge Challenger/Charger SRT8 V8-6.4L
This 9” tall 360-degree radial flow air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media...- $1,329.00
- $1,329.00
- Unit price
- per
-
Vendor:aFe
aFe Black Series Cold Air Intake 12-15 Porsche Carrera/Carrera S 3.4L/3.8L
Unique computer Designed Housing: A custom CAD plastic housing encloses the dual performance air filters. This roto-molded housing is made out of black cross-linked polyethylene and mounts directly into the factory mounting location. It also connects to the factory air inlets to capture the...- $1,394.00
- $1,394.00
- Unit price
- per
-
Vendor:aFe
aFe Black Series Cold Air Intake 12-19 Jeep Gand Cherokee (WK2) SRT-8/SRT V8 6.4L HEMI
This 8-1/2” tall 360-degree radial flow air filter features our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains...- $1,329.00
- $1,329.00
- Unit price
- per
-
Vendor:aFe
aFe BladeRunner 2 1/2in Intercooler Tube Hot Side 15-16 Ford Mustang EcoBoost L4-2.3L (t)
aFe Powers intercooler tubes are constructed from mandrel-bent aluminum tubing for maximum flow then, powder-coated for a nice finish. The high-temp wrinkle-black powder-coating also insulates the tubes from engine heat and protects the tube from corrosion. The smooth transitional bends decrease turbulence and minimize...- $338.00
- $338.00
- Unit price
- per
-
Vendor:aFe
aFe Bladerunner 3in Black Intercooler Hot and Cold Side Tubes 14-15 Dodge Ram 1500 EcoDiesel V6 3.0L
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...- $619.00
- $619.00
- Unit price
- per
-
Vendor:aFe
aFe Bladerunner 3in Intercooler Cold Side Tube for 16-17 Nissan Titan XD V8 5.0L (td)
Flow and Performance: Constructed of 3" mandrel bent, powder-coated aluminum tubing for maximum flow. The smooth transition bends decrease turbulence and minimize pressure loss, increasing horsepower, torque and lowering EGT's. Installs on the Hot Side to transfer heated air smoothly to the intercooler to...- $323.00
- $323.00
- Unit price
- per
-
Vendor:aFe
aFe Bladerunner 3in Intercooler Hot and Cold Side Tubes 16-17 Nissan Titan XD V8 5.0L (td)
Flow and Performance: Constructed of mandrel bent, powder-coated aluminum tubing for maximum flow. The smooth transition bends decrease turbulence and minimize pressure loss, increasing horsepower, torque and lowering EGT's. Perfect Fit: Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes...- $689.00
- $689.00
- Unit price
- per
-
Vendor:aFe
aFe Bladerunner 3in Intercooler Hot Side Tube for 16-17 Nissan Titan XD V8 5.0L (td)
Flow and Performance: Constructed of 3" mandrel bent, powder-coated aluminum tubing for maximum flow. The smooth transition bends decrease turbulence and minimize pressure loss, increasing horsepower, torque and lowering EGT's. Installs on the Hot Side to transfer heated air smoothly to the intercooler to...- $393.00
- $393.00
- Unit price
- per
-
Vendor:aFe
aFe BladeRunner 3in Intercooler Tube Cold Side 15-16 Ford Mustang EcoBoost L4-2.3L (t)
aFe Powers intercooler tubes are constructed from mandrel-bent aluminum tubing for maximum flow then, powder-coated for a nice finish. The high-temp wrinkle-black powder-coating also insulates the tubes from engine heat and protects the tube from corrosion. The smooth transitional bends decrease turbulence and minimize...- $274.00
- $274.00
- Unit price
- per
-
Vendor:aFe
aFe BladeRunner 3in Intercooler Tube Cold Side Black for 14-15 Ram 1500 EcoDiesel V6-3.0L (td)
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...- $338.00
- $338.00
- Unit price
- per
-
Vendor:aFe
aFe Bladerunner 3in Red Intercooler Cold Side w/ Couplings Ram 1500 EcoDiesel 2014 V6 3.0L
The ATLAS exhaust race pipe is engineered to perform in the most extreme environments. This system is constructed from 4" mandrel-bent aluminized tubing for maximum flow, increased horsepower, increased torque and lower EGTs. The ATLAS exhaust race pipe is the perfect combination of performance,...- $354.00
- $354.00
- Unit price
- per
-
Vendor:aFe
aFe Bladerunner 3in Red Intercooler Hot and Cold Side Tubes 14-15 Dodge Ram 1500 EcoDiesel V6 3.0L
aFe Bladerunner 3in Red Intercooler Hot and Cold Side Tubes 14-15 Dodge Ram 1500 EcoDiesel V6 3.0LThis Part Fits: Year Make Model Submodel 2014-2015 Ram 1500 Big Horn 2014-2015 Ram 1500 Laramie 2014-2015 Ram 1500 Laramie Limited 2014-2015 Ram 1500 Laramie Longhorn 2015 Ram...- $689.00
- $689.00
- Unit price
- per
-
Vendor:aFe
aFe BladeRunner Couplings and Clamp Kit GT Series Intercooler 14-15 Ram 1500 EcoDiesel V6-3.0L (td)
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance...- $323.00
- $323.00
- Unit price
- per
-
Vendor:aFe
aFe BladeRunner Couplings and Clamps Kit 16-17 Nissan Titan XD V8 5.0L (td) (Use w/ 46-20184-B)
Reinforced Silicone: These coupler hose features 5-PLY reinforced high temperature material which meet or exceed SAEJ20 Standard. Coupler Hoses: Allow for expansion, movement, and extreme vibration between two hard pipes while reducing the possibility of connections coming apart or having your hard pipes or...- $323.00
- $323.00
- Unit price
- per
-
Vendor:aFe
aFe BladeRunner Couplings and Clamps Kit for 16-17 Nissan Titan XD V8 5.0L (td) (Use w/46-20282-B)
Reinforced Silicone: These coupler hose features 5-PLY reinforced high temperature material which meet or exceed SAEJ20 Standard. Coupler Hoses: Allow for expansion, movement, and extreme vibration between two hard pipes while reducing the possibility of connections coming apart or having your hard pipes or...- $323.00
- $323.00
- Unit price
- per
-
Vendor:aFe
aFe BladeRunner Exhaust Manifold Dodge/RAM 1500 09-18/RAM 1500 Classic 19-24 V8-5.7L HEMI
These manifolds have both the inlet, and the outlet ports machined to match the factory gaskets. This allows for maximum flow, without compromising gasket performance. These manifolds have 25% Thicker walls than the crack-prone factory manifolds. The increase in thickness increases the rigidity of...- $500.00
- $500.00
- Unit price
- per
-
Vendor:aFe
aFe BladeRunner Exhaust Manifold RAM 1500 (DT) 19-24 V8-5.7L HEMI
These manifolds have both the inlet, and the outlet ports machined to match the factory gaskets. This allows for maximum flow, without compromising gasket performance. These manifolds have 25% Thicker walls than the crack-prone factory manifolds. The increase in thickness increases the rigidity of...- $500.00
- $500.00
- Unit price
- per
