Oils & Oil Filters

Cleaning is made with the compressed air gun for DPF (part no. 7946) and the specially developed DPF-Probe with 5 interchangeable tips (part no. 7945) or the DPF spray Probe long (part no. 20630). The diesel particle filter must be accessed depending on the...

Modern fully synthetic, low-SAPS motor oil for superior performance and long engine life. Designed for use in numerous Volkswagen and Audi vehicles and also suitable for use in a variety of BMW and Mercedes-Benz diesel vehicles as well as specific Porsche models, etc. Use...

MoS2 Anti-Friction Engine Treatment ensures immediate friction and wear reduction, adds an extremely protective and pressure-resistant boundary layer with low friction and lubricates during cold starts to prevent damage from lack of oil. Contributes to lower fuel consumption, longer engine life and less noise....

One 300 ml can is sufficient for up to 75 liters (20 gal.) of fuel. Regular use keeps injection system in perfect working order and gives lowest exhaust emissions. Smoother idling, better throttle response. Injection Cleaner can be mixed with fuel at any time...

Preventive use Fill the fuel filter up with Diesel Purge when doing filter replacement, put the rest in tank. Remedial use Unclip the fuel pipe and immerse the end in the Diesel Purge. Close the fuel return pipe or feed that into the Diesel...

Fully synthetic hypoid gear oil, developed for use in final drives with or without wet clutch-based differentials (Limited Slip). Stable viscosity and multifunctional EP additives guarantee maximum wear protection even under extreme operating conditions. Exceeds the high requirements of well-known vehicle manufacturers and recommended...

Keeps rubber and plastic seals in automatic transmissions soft and pliable. Leaks caused by hardened and brittle seals are prevented or eliminated. Cleans internal oil passages to allow proper oil flow while restoring the oils performance. Reduces noise and improves shift performance in automatic...

Modern fully synthetic, low-SAPS motor oil for superior performance and long engine life. Designed for use in numerous Volkswagen and Audi vehicles and also suitable for use in a variety of BMW and Mercedes-Benz diesel vehicles as well as specific Porsche models, etc. Use...

Fully synthetic central hydraulic system oil that meet and exceed many OE specifications. Unique formulation allows for high thermal stability and excellent resistance to aging or break down. Maximum wear protection and proper friction behavior. Has outstanding low-temperature behavior and very high corrosion-protection. The...

Fully synthetic leading edge, high-performance automatic transmission fluid. Developed to meet the severe requirements of modern multi-speed transmissions designed with 6 or more gears. The use of modern additive technology provides ultimate protection, longer fluid life and stability combined with ideal shift quality under...

Fully synthetic leading edge, high-performance automatic transmission fluid. Developed to meet the severe requirements of modern multi-speed transmissions designed with 6 or more gears. The use of modern additive technology provides ultimate protection, longer fluid life and stability combined with ideal shift quality under...

The specifications and instructions from the unit or vehicle manufacturer must be followed. Top Tec ATF 1200may be used for refilling systems in which traditional ATF fluids are used. Optimum effectiveness, however, is only possible when the product is used on its own (i.e....

The specifications and instructions from the unit or vehicle manufacturer must be followed. Top Tec ATF 1200may be used for refilling systems in which traditional ATF fluids are used. Optimum effectiveness, however, is only possible when the product is used on its own (i.e....

A combination of additives to clean and maintain the diesel fuel system. Prevents corrosion, increases lubrication thus reduces fuel pump and injector wear. Increases Cetane value for improved engine performance, easier starting and lower emissions. Regular use keeps the fuel system in perfect working...

The specifications and instructions from the unit or vehicle manufacturer must be followed. Top Tec ATF 1200may be used for refilling systems in which traditional ATF fluids are used. Optimum effectiveness, however, is only possible when the product is used on its own (i.e....

During selection, keep to the viscosity class stipulated by the transmission manufacturer. Miscible with all branded gear oils. Fully effective only when used alone. Only use in manual transmissions for which API GL5 oils have been stipulated.This Part Fits: Year Make Model Submodel 2003-2013...

For all gasoline engines. Suitable for standard and high-octane gas, leaded and unleaded. 150 ml is sufficient for up to 75 liters (20 gal.)of fuel.Minimum fuel filling of 25 liters (7 gal.) is requested for optimum product performance.

One 300 ml can of Liqui Moly hydraulic tappet additive is sufficient for up to 6 liters (1.5 gal.) motor oil. The product can be added at any time. After adding, run the engine until warm. For a lasting effect, Liqui Moly Hydraulic tappet...

High-tech anti-wear additive, suitable for most 4-stroke engines as well as manual transmissions and compressors.Reduces friction and wear thanks to a unique combination of ceramic compounds and chemical anti-wear agents. It will prevent direct metal-to-metal contact and reduce friction to increase engine life and...

For best results and long-term effect add DPF protector exery 2.000 km (1.200 miles). One 300 ml can is sufficient for 75 liters (20 gal.) of Diesel. Minimum fuel filling of50 liters (14 gal.) is requested for optimum product performance.